Harley Sportster Torque Specs Pdf. Federal motor vehicle safety standa rds and u.s. Attempt to turn the fastener using a torque wrench set to the minimum torque specification for that fastener.
Environmental protection agency regulations effective on the date of manufacture. If fastener moves, tighten to specification. The torque of the harley 114 is 155 mm@3250 rpm.
Remove And Discard Top Cover And Pull The Top Cover Out The Right Side Of The Motorcycle For Added Clearance.
You may look for the harley torque specs pdf to get a complete guideline on the various torque. Refer to table 4 for general torque specifications. Web head procedure for the sportster/buell models.
The Torque Of The Harley 114 Is 155 Mm@3250 Rpm.
Follow the procedures in this instruction sheet. What i know off the top of my head: Attempt to turn the fastener using a torque wrench set to the minimum torque specification for that fastener.
The Information Is Divided Into Four Sections:
Web it is one of the most powerful harley engines with that massive capacity. Hope some of you find this useful. Position a jack with a wooden block under the engine.
Petcock, Evaporative Emissions Control, Carburetor Removal, Carburetor Installation, Carburetor Assembly, Carburetor Disassembly, Specifications.
You will need its torque specifications whenever you plan. Web below you can find a vast array of technical information about the. Web refer to your service manual for locations of serial stamp locations and for complete specifications of your year and model motorcycle.
Web Exhaust Bracket To Transmission Side Door.
Minton explains that the procedure requires the use of a torque wrench but not for final tightening. Disassemble, lubricate and inspect every 30,000 mi (48,000 km). If fastener moves, tighten to specification.